SUITABLE FOR NEW (GREEN) SELF-CONTAINMENT REGULATIONS
Please note that measurements provided are for SCNZ supplied sinks.
25 Litre waste water tank with selected fittings and vent hose;
Tank orientation should be selected based on the floor to bench-top clearance height as listed. This is measured as the distance between where the bottom of the tank will sit and the top of the bench where the sink is inserted.
All selections include:
- Opaque non corroding 25 litre waste tank
- Vent and waste inlet fittings, threaded and epoxy sealed to tank to completely seal as required under regulations.
- Minimum 2m vent hose.
- Caps to seal inlets when emptying.
More Information:
- waste trap/water seal can be formed by cable tying a loop into the waste hose (cable ties not included), or by mounting a 'u' in the hose to the cabinetry.
- Tank dimensions 285x285x460 excluding fittings
Please remember for the self containment test the vent must extend to the top of the sink before terminating outside so consider this when choosing vent length.